處理酒店標識牌不銹鋼板表面的工藝分享！

    酒店標識牌的吹干工作有一些什么技巧呢，如用吹干，用吹風機把清洗好的不銹鋼板表面殘留的水滴吹干，不要留下水漬。這些就是防止這些做好的標識牌不易被破壞，造成養化。
    一些酒店的標識牌的花紋是需要蝕刻的，那是如何制作的原理呢？不銹鋼板酒店標牌的制作,主要采用蝕刻的工藝來完成。它的蝕刻原理是：

    這里要注意的是酒店標識牌系統制作時的材料和厚度，這個代表不銹鋼板的厚度，我們先在它的表面均勻的涂上一層耐腐蝕的感光油墨，在上面放上一張菲林底片，用紫外光進行曝光，穿過菲林底片上透明部分的紫外光會與感光油墨起化學反應，形成抗弱堿性的凃?qū)樱屏值灼谏糠窒旅娴母泄庥湍珓t不耐弱堿。通過這些處理好，拿去菲林底片，把不銹鋼板泡在弱堿性的碳酸鈉溶液中，不耐弱堿部分的凃?qū)泳蜁c碳酸鈉溶液起化學反應而脫落，這些地方的金屬就裸露出來了，不銹鋼板上就會呈現出圖案。這就是我們平時看到的一些非常漂亮的酒店圖案，都可以做在酒店的標識牌上，這樣形成了酒店的統一風格化，在它的反面貼上一層防腐保護膜，把它放入蝕刻機里，用三氯化鐵溶液沖刷暴露著的不銹鋼板表面，三氯化鐵溶液中的三價鐵離子會快速氧化、蝕刻這部分不銹鋼板，我們用微距拍攝可以清晰地看到，局部的不銹鋼板被蝕刻下去了，在有些制作時可以多次進行，讓其產生不同的效果，這樣的酒店形象標識牌還需要注意表面的光，不要花了，這樣就不精致了。

Hotel signage stainless steel plate processing surface of the craft to share!

     The dry hotel signage what skills do some work, such as with dry with a hair dryer to clean the surface of stainless steel a good residual water droplets dry, do not leave water spots. These identity cards to prevent these do not easily damaged, resulting in eutrophication.
     Some hotel signage etched pattern is needed, it is how to make the principle of it? Hotel stainless steel plate production, mainly to complete the etching process. It's etched principle is:

     Here we must note that when the hotel signage systems to produce the material and thickness, which represents the thickness of steel plate, we first of its surface evenly coated with a layer of corrosion-resistant light-sensitive ink, put a film in the above film, for UV exposure, through film on the transparent part of the film with UV light-sensitive ink from a chemical reaction, the formation of alkaline resistant coating, film negatives black ink is light-sensitive part of the following impatience weak base. These deal with, take film negatives, the stainless steel plate soaked in alkaline sodium carbonate solution, intolerance weak base part of the coating will react with sodium carbonate solution and off, where the bare metal on the out, stainless steel plate will be showing a pattern. This is what we usually see some very nice hotels patterns, can be done in the hotel's logo on the card, creating a uniform style of the hotel, in its negative paste layer anti-corrosion protective film, put it into the etching machine, the use of ferric chloride solution, washed with stainless steel plate exposed to the surface of ferric chloride solution in the ferric ion rapidly oxidized, etched stainless steel this part, we can clearly see the macro, local stainless steel plate was etched down, and in some production can be repeated, let it produce different results, this image of the hotel signage also need to pay attention to the surface of the light, not spent, so as not to fine the.